Mingrui
 【Origin Pic】 |
Introduce of SMT Solder Paste Printer MPM Momentum II Newly designed cover set with larger window and wider access inside the printer. Quick release squeegee for faster changeover. Adjustable stencil shelf for flexibility handling board varieties. New jar paste dispenser for increased productivity. |
|
|
Newly designed cover set with larger window and wider access inside the printer.
Quick release squeegee for faster changeover.
Adjustable stencil shelf for flexibility handling board varieties.
New jar paste dispenser for increased productivity.
Solder paste roll height and paste temperature monitoring for yield improvementand traceability.
Upgraded Benchmark GUI with customizable production page and Quickstart program.
Windows 10 operating system.
| MPM Momentum II 100 | |
| BOARD HANDLING | |
| Maximum Board Size (X * Y) | 609.6 mm x 508 mm (24” x 20”) |
| A dedicated workholder is required for boards with an X size greater than 20” | |
| Minimum Board Size (X x Y) | 50.8 mm x 50.8 mm (2” x 2”) |
| Board Thickness | 0.2 mm to 5.0 mm (0.008” to 0.20”) |
| Maximum Board Weight | 4.5 kg (10 lbs) |
| Board Edge Clearance | 3.0 mm (0.118″) |
| Underside Clearance | 12.7 mm (0.5″) standard Configurable for 25.4 mm (1.0”) |
| Board Hold-Down | Fixed top clamps, centernest vacuum |
| Board Support Methods | Magnetic pins Optional: Vacuum side dams, vacuum pins, support blocks, dedicated fixtures, patented auto tooling, Quik-Tool |
| PRINT PARAMETERS | |
| Maximum Print Area (X * Y) | 609.6 mm x 508 mm (24” x 20″) |
| Print Gap (Snap-off) | 0 mm to 6.35 mm (0″ to 0.25″) |
| Print Speed | 0.635 mm/s – 304.8 mm/s (0.025 in/s – 12 in/s) |
| Print Force | 0 to 22.7 kg (0 lb to 50 lbs) |
| Stencil Frame Size | 737 mm x 737 mm (29″ x 29″) Adapters available for smaller sizes |
| VISION | |
| Vision Field-of-View (FOV) | 10.6 mm x 8.0 mm (0.417” x 0.315”) |
| Fiducial Types | Standard shape fiducials (see SMEMA standards), pad/aperture |
| Camera System | Single digital camera – MPM patented look up/down vision |
| PERFORMANCE | |
| Total System Alignment | ±12.5 microns (±0.0005”) at 6 sigma |
| Accuracy and Repeatability | Cpk ≥ 2.0* |
| Qualification is performed using production environment process variables; print speed, table lift and camera movement are included in the capability figure. | |
| Wet Print Deposit | ±20 microns (±0.0008”) at 6 sigma, |
| Accuracy and Repeatability | Cpk ≥ 2.0* |
| Based upon actual wet printing with positional accuracy and repeatability verified by a 3rd party measurement system. | |
| Cycle Time | 11 seconds standard |
| FACILITIES | |
| Power Requirements | 200 to 240 VAC (±10%) single phase @ 50/60Hz, 15A |
| Air Supply Requirements | 100 psi at 4 cfm (standard run mode) to 18 cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5
L/s), 12.7 mm (0.5”) diameter line, OD x 9.5 mm (3/8”) ID line |
| Height (excluding light tower) | 1589.4 mm (62.57″) at 940 mm (37.0”)transport height |
| Machine Depth | 1394 mm (54.88″) |
| Machine Width | 1195.4 mm (47.06”) |
| Minimum Front Clearance | 508 mm (20.0”) |
| Minimum Rear Clearance | 508 mm (20.0”) |
| Machine Weight | 797 kg (1757 lbs) |
| Crated Weight | 1090.5 kg (2399 lbs) |
