Mingrui
 【Origin Pic】 |
Introduction of SMT Printer Full-auto SMT Stencil Printer is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation, achieve zero defect. 1. High positional accuracy, repeated positioning accuracy ±0.01mm; printing accuracy 0.025mm 2. Support glue printing,Automatic control improves production efficiency, quality control and saves production cost |
|
|
Full-auto SMT Stencil Printer is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation, achieve zero defect.
1. High positional accuracy, repeated positioning accuracy ±0.01mm; printing accuracy 0.025mm
2. Support glue printing,Automatic control improves production efficiency, quality control and saves production cost
3. Automatic PCB calibration,Squeegee pressure adjustable,Automatic printing,Automatic stencil cleaning
4. Programmable motor controls separation speed and distance among squeegee, stencil and substrate, to realize multi-method separation. 5,Multi-functional PCB positioning system for convenient and accurate PCB positioning.
6.Programmable PCB lifting platform ensure the PCB to lift to a proper height
7. Adopt company independently developed suspended print head with automatic pressure adjustment system.
| Model | L8 | |
| Screen Frames | Min Size | 650X650mm |
| Max Size | 850X850mm | |
| Thickness | 25~40mm | |
| PCB Min Size | 80x50mm | |
| PCB Max Size | 650x610mm | |
| PCB Thickness | 0.4~6mm | |
| PCB Warpage | <1% | |
| Transport Height | 900±40mm | |
| Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right | |
| Transport Speed | Max 1500mm/S Programmable | |
| Board Location | Support System | Magnetic Pin/Up-downtable adjusted/supportblock by hand |
| Clamping System | side clamping,vacuum nozzle, | |
| Print head | Two independent motorised printheads | |
| Squeegee Speed | 6~200mm/sec | |
| Squeegee Pressure | 0~15Kg | |
| Squeegee Angle | 60°/55°/45° | |
| SqueegeeType | Stainless steel(Standard),plastic | |
| Stencil Separation Speed | 0.1-20mm/sec Programmable | |
| Cleaning System | Dry、Wet、Vacuum(Programmable) | |
| TableAdjustment ranges | X:±10mm;Y:±10mm;θ:±2° | |
| CCD FOV | 8x6mm | |
| Solder Paste Inspection | 2DInspection Standard | |
| Repeat Position Accuracy | ±0.01mm | |
| Printing Accuracy | ±0.025mm | |
| Cycle Time | <11s(Exclude Printing &Cleaning) | |
| Product Changeover | <5Min | |
| Air Required | 4.5-6Kg/cm2 | |
| Power Input | AC:220±10%,50/60HZ 1Φ 3KW | |
| Control Method | PC Contro | |
| Machine Dimensions | 1330(L)X1530(W)X1500(H)mm | |
| Machine Weight | Approx:1000Kg | |
