Features of FUJI NXT III
FUJI fastest SMT machines pick and place machine, FUJI SMT pick and place machine, FUJI chip mounter, for SMT
assembly system.
The NEW NXT 3 SMT machine is a highly productive, multi-functional modular placing machine. Built for speed, it
features a faster XY robot and tape feeders, as well as a new H24 FUJI NXT head that achieves 35,000 chips per
hour. The NXTIII supports the smallest parts being used in mass production with extreme placing accuracy.
A faster XY robot and faster tape feeders, as well as a newly developed “flying vision” parts camera, mean
increased placing ability for all part sizes and types.
The new H24G high-speed head achieves 37,500 cph (chips per hour) (Productivity priority mode) per module, a 44%
improvement from the fastest speed of the NXT II. The details please check the following FUJI NXT Full Form
Specifications.
Specification of FUJI SMT pick and place machine
Product Parameters
|
Basic Specifications
|
|
PCB size(LXW)
|
48 x 48 mm to 774 x 610 mm (double conveyor)*
48 x 48 mm to 774 x 710 mm (single
conveyor)
*Double conveyors can handle PCBs up to 330 (W) mm. PCBs larger than 330 (W) mm
must be produced by changing the double conveyor to single lane production mode.
|
|
Feeder capacity
|
Up to 130 (8 mm tape)
|
|
Placing accuracy
(Fiducial mark based referencing)
|
H24G: +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode, under development)
(3sigma) cpk≥1.00
H08M: +/-0.040 mm (3σ) cpk≥1.00
OF: +/-0.050 mm (3σ) cpk≥1.00
H02F:
+/-0.025 mm (3σ) cpk≥1.00
H01: +/-0.030 mm (3σ) cpk≥1.00
|
|
Machine dimensions
|
L: 1280mm, W: 2656mm, H: 1556mm
|
